H1 LED bulbs G20
With this LED conversion kit, you can replace the H1 halogen bulb with a powerful LED bulb. LED bulbs light up immediately at full power, even in the cold, so they do not experience a delay due to the heating of the bulbs like xenon bulbs. Because G20 bulbs have power, they also need cooling - cooling is provided by a fan. One bulb has two large LEDs.
The narrowness of the base and its conical shape facilitate installation. The bulbs do not have any separate ballast, but all electronics are built into the bulb, including the CANBUS controller. The LEDs illuminate evenly in two directions, giving them a natural pattern like a halogen bulb - no shading areas.
Technical data provided by the manufacturer:
- Power 24W / bulb
- Light output 2400 Lumen / bulb
- color temperature 6000K
- CANBUS compatible
- one year warranty!
The total length of the LED bulb is 90 mm, the length of the base is 45 mm, the maximum width of the base is 40 mm. The total length of the connecting cable is approx. 15 cm.
Installation is easy - the LED bulb is installed in place of the halogen bulb and the wires are connected. When installing, it is a good idea to take into account the space required by the fan in the base.
Installation may require separate adapters to install the LED bulb in place of the halogen bulb. they can be found here:
Accessories for LED conversion kits
Not for road use, as the bulb marked on the headlight assy must be used.