H3 T1 LED conversion kit

55.00 €
45.00 / pair(s)
Delivery weight: 400 g


H3 Led bulbs T1

 

With this LED conversion kit you can replace the H3 halogen bulb with a powerful LED bulb. LED bulbs light up immediately at full power, even in the cold, so they do not experience a delay due to the heating of the bulbs like xenon bulbs. Because T1 bulbs have power, they also need cooling - cooling is provided by a fan. One bulb has four large LEDs.

 

The narrowness of the base and its conical shape facilitate installation. The bulbs do not have any separate ballast - all electronics are built into the bulb, including the CANBUS controller. The LEDs illuminate evenly in four directions, giving them a natural pattern like a halogen bulb - no shading areas.

 

Technical data provided by the manufacturer:

- Power 35W / bulb

- Light output 3600 Lumen / bulb

- color temperature 6000K

- CANBUS compatible

- one year warranty!

 

The total length of the bulb is 77 mm, the length of the base is 45 mm, the maximum width of the base is 38 mm. The total length of the connecting cable is approx. 31 cm.


Installation is easy - the bulb is installed in place of the halogen bulb and the wires are connected. When installing, it is a good idea to take into account the space required by the fan in the base.

 

Not for road use, as the bulb marked in the headlight assy must be used.

We also recommend

ELM 327 V2.1 Bluetooth OBD2 reader
12.00
Delivery weight: 50 g
H3 Xenon HID kit CANBUS 55W
62.00
Delivery weight: 1 kg
SV8,5 41mm 12V 4 led canbus
3.90
Delivery weight: 5 g
Jump starter 600A
69.00 / set(s)
Delivery weight: 1,500 g
GPS-Tracker ST-901A+
from 45.00 / set(s)
Delivery weight: 110 g

Browse these categories as well: LED CONVERSION KITS, LED PRODUCTS