H4 LED bulbs T1S

With this LED conversion kit you can replace the H4 halogen bulb with a powerful LED bulb. LED bulbs light up immediately at full power, even in the cold, so they do not experience a delay due to the heating of the bulbs like xenon bulbs. Because T1S bulbs have power, they also need cooling - cooling is provided by a fan. 

Technical data provided by the manufacturer:

- Power 40W / bulb

- Light output 4000 Lumen / bulb

- color temperature 6000K

- 8-48 V

- CANBUS compatible

- one year warranty!

The total length of the bulb is 83 mm, the length of the base is 36 mm, the maximum width of the base is 40 mm. Total lenght of the connection wire is about 30 cm. 

Installation is easy - the bulb is installed in place of the halogen bulb and the wires are connected. When installing, it is a good idea to take into account the space required by the fan in the base.

Not for road use, as the bulb marked in the headlight assy must be used.

HB4 9006 LED bulbs T1S

With this LED conversion kit you can replace the HB4 or 9006  halogen bulb with a powerful LED bulb. LED bulbs light up immediately at full power, even in the cold, so they do not experience a delay due to the heating of the bulbs like xenon bulbs. Because T1S bulbs have power, they also need cooling - cooling is provided by a fan. 

Technical data provided by the manufacturer:

- Power 40 W / bulb

- Light output 4000 Lumen / bulb

- color temperature 6000K

- 8-48 V

- CANBUS compatible

- one year warranty!

The total length of the bulb is 83 mm, the length of the base is 30 mm, the maximum width of the base is 39 mm. Total lenght of the connection wire is about 30 cm. 

Installation is easy - the bulb is installed in place of the halogen bulb and the wires are connected. When installing, it is a good idea to take into account the space required by the fan in the base.

Not for road use, as the bulb marked in the headlight assy must be used.

BA20D LED bulb for moped

With BA20D LED bulb you can replace the BA20D / H6 halogen bulb of a moped or smaller motorcycle with a powerful LED bulb. LED bulbs light up immediately at full power, even in the cold, so they do not have a delay due to the heating of the bulbs like xenon bulbs. One bulb has four large LEDs on sides and one pointing to forward.

Technical data provided by the manufacturer:

- color temperature 6000K

- operating voltage 6 - 18V

The total length of the bulb is 70 mm, the length of the base is 27 mm, the width of the base is 20 mm. 

 Not for road use, as a bulb marked on the headlight assy must be used.

HB3 9005 LED bulbs G7

With the HB3 9005 LED conversion kit, you can replace the HB3 or 9005 halogen bulb with a powerful LED bulb. LED bulbs light up immediately at full power, even in the cold, so they do not experience a delay due to the heating of the bulbs like xenon bulbs. Because the G7 bulbs have power, they also need cooling - the fan takes care of the cooling. One bulb has four large LEDs.

The small size of the base makes installation easier - the base is not much different in size from the original halogen bulb, so these fit into even a cramped enclosure. The LEDs illuminate evenly in four directions, giving them a natural pattern, like a halogen bulb - no shaded areas. The package contains 2 LED bulbs.

Technical data provided by the manufacturer:

- Power 40W / 4000 lm / bulb

- 9 - 36 V

- 300% light output compared to a halogen bulb

- color temperature 6000K

- CANBUS compatible

- one year warranty!

The total length of the bulb is about 74 mm, the length of the base is 25 mm, the maximum width of the base is 29 mm.

Installation is easy - the bulb is installed in place of the halogen bulb and the wires are connected. When installing, it is a good idea to consider the space required by the fan in the base.

Separate adapters may be required for installation to replace the halogen bulb. they can be found here:

Accessories for LED conversion kits

Not for road use, as the bulb marked on headlight assy must be used.

H8 H9 H11 LED bulbs G7

With this LED conversion kit you can replace the H8, H9 and H11 halogen bulb with a powerful LED bulb. LED bulbs light up immediately at full power, even in the cold, so they do not experience a delay due to the heating of the bulbs like xenon bulbs. Because G7 bulbs have power, they also need cooling - cooling is provided by a fan. One bulb has four large LEDs.

The small size of the base facilitate installation. The LEDs illuminate evenly in four directions, giving them a natural pattern like a halogen bulb - no shading areas.

Technical data provided by the manufacturer:

- Power 40W / bulb

- Light output 4000 Lumen / bulb

- color temperature 6000K

- 9-36 V

- CANBUS compatible

- one year warranty!

The total length of the bulb is 74 mm, the length of the base is 25 mm, the maximum width of the base is 29 mm. 

Installation is easy - the bulb is installed in place of the halogen bulb and the wires are connected. When installing, it is a good idea to take into account the space required by the fan in the base.

Installation may require separate adapters to install the LED bulb in place of the halogen bulb. they can be found here:

Accessories for LED conversion kits

Not for road use, as the bulb marked in the headlight assy must be used.

HIR2 9012 LED Bulbs G7

With this LED conversion kit you can replace the HIR2 / 9012 halogen bulb with a powerful LED bulb. LED bulbs light up immediately at full power, even in the cold, so they do not experience a delay due to the heating of the bulbs like xenon bulbs. Because G7 bulbs have power, they also need cooling - cooling is provided by a fan. One bulb has four large LEDs.

The small size of the base facilitate installation. The LEDs illuminate evenly in four directions, giving them a natural pattern like a halogen bulb - no shading areas.

Technical data provided by the manufacturer:

- Power 40W / bulb

- Light output 4000 Lumen / bulb

- color temperature 6000K

- 9-36 V

- CANBUS compatible

- one year warranty!

The total length of the bulb is 70 mm, the length of the base is 25 mm, the maximum width of the base is 29 mm. 

Installation is easy - the bulb is installed in place of the halogen bulb and the wires are connected. When installing, it is a good idea to take into account the space required by the fan in the base.

Installation may require separate adapters to install the LED bulb in place of the halogen bulb. they can be found here:

Accessories for LED conversion kits

Not for road use, as the bulb marked in the headlight assy must be used.

9005 HB3 LED bulbs G20

With this LED conversion kit you can replace the HB3 / 9005 halogen bulb with a powerful LED bulb. LED bulbs light up immediately at full power, even in the cold, so they do not experience a delay due to the heating of the bulbs like xenon bulbs. Because G20 bulbs have power, they also need cooling - cooling is provided by a fan. One 9005 bulb has four large LEDs.

The narrowness of the base and its conical shape facilitate installation. The bulbs do not have any separate ballast - all electronics are built into the bulb, including the CANBUS controller. The LEDs illuminate evenly in four directions, giving them a natural pattern like a halogen bulb - no shading areas.

Technical data provided by the manufacturer:

- Power 40W / bulb

- Light output 4000 Lumen / bulb

- color temperature 6000K

- CANBUS compatible

The total length of the bulb is 90 mm, the length of the base is 45 mm, the maximum width of the base is 40 mm. The total length of the connecting cable is approx. 15 cm.

Installation is easy - the bulb is installed in place of the halogen bulb and the wires are connected. When installing, it is a good idea to take into account the space required by the fan in the base.

Installation may require separate adapters to install the LED bulb in place of the halogen bulb. they can be found here:

Accessories for LED conversion kits

Not for road use, as the bulb marked in the headlight assy must be used.

H4 LED bulbs G20

With this H4 LED conversion kit, you can replace the H4 halogen bulb with a powerful LED bulb. LED bulbs light up immediately at full power, even in the cold, so they do not experience a delay due to the heating of the bulbs like xenon bulbs. Because G20 bulbs have power, they also need cooling - cooling is provided by a fan. One bulb has four large LEDs.

The narrowness of the base and its conical shape facilitate installation. The bulbs do not have any separate ballast, but all electronics are built into the bulb, including the CANBUS controller. The LEDs illuminate evenly in four directions, giving them a natural pattern like a halogen bulb - no shading areas.

Technical data provided by the manufacturer:

- Power 40W / bulb

- Light output 4000 Lumen / bulb

- color temperature 6000K

- CANBUS compatible

- one year warranty!

The total length of the bulb is 88 mm, the length of the base is 45 mm, the maximum width of the base is 40 mm. The total length of the connecting cable is approx. 15 cm.

Installation is easy - the bulb is installed in place of the halogen bulb and the wires are connected. When installing, it is a good idea to take into account the space required by the fan in the base.

Not for road use, as the bulb marked in the headlight assy must be used.

HIR2 9012 LED bulbs G20

With this LED conversion kit you can replace the HIR2 / 9012 halogen bulb with a powerful LED bulb. LED bulbs light up immediately at full power, even in the cold, so they do not experience a delay due to the heating of the bulbs like xenon bulbs. Because G20 bulbs have power, they also need cooling - cooling is provided by a fan. One bulb has four large LEDs.

The narrowness of the base and its conical shape facilitate installation. The bulbs do not have any separate ballast - all electronics are built into the bulb, including the CANBUS controller. The LEDs illuminate evenly in four directions, giving them a natural pattern like a halogen bulb - no shading areas.

Technical data provided by the manufacturer:

- Power 40W / bulb

- Light output 4000 Lumen / bulb

- color temperature 6000K

- CANBUS compatible

- one year warranty!

The total length of the bulb is 90 mm, the length of the base is 45 mm, the maximum width of the base is 40 mm. The total length of the connecting cable is approx. 15 cm.

Installation is easy - the bulb is installed in place of the halogen bulb and the wires are connected. When installing, it is a good idea to take into account the space required by the fan in the base.

Installation may require separate adapters to install the LED bulb in place of the halogen bulb. they can be found here:

Accessories for LED conversion kits

Not for road use, as the bulb marked in the headlight assy must be used.

HIR2 9012 LED bulbs T1S

With this LED conversion kit you can replace the HIR2 / 9012 halogen bulb with a powerful LED bulb. LED bulbs light up immediately at full power, even in the cold, so they do not experience a delay due to the heating of the bulbs like xenon bulbs. Because T1S bulbs have power, they also need cooling - cooling is provided by a fan. One bulb has four large LEDs.

Technical data provided by the manufacturer:

- Power 40 W / bulb

- Light output 4000 Lumen / bulb

- color temperature 6000K

- 8-48 V

- CANBUS compatible

- One year warranty

The total length of the bulb is 82 mm, the length of the base is 30 mm, the maximum width of the base is 39 mm. Total lenght of the connection wire is about 30 cm. 

Installation is easy - the bulb is installed in place of the halogen bulb and the wires are connected. When installing, it is a good idea to take into account the space required by the fan in the base.

Not for road use, as the bulb marked in the headlight assy must be used.