HB3 9005 H10 LED bulbs T1S

With this LED conversion kit you can replace the HB3 or 9005  halogen bulb with a powerful LED bulb. LED bulbs light up immediately at full power, even in the cold, so they do not experience a delay due to the heating of the bulbs like xenon bulbs. Because T1S bulbs have power, they also need cooling - cooling is provided by a fan. 

Technical data provided by the manufacturer:

- Power 40W / bulb

- Light output 4000 Lumen / bulb

- color temperature 6000K

- 8-48 V

- CANBUS compatible

- one year warranty

The total length of the bulb is 83 mm, the length of the base is 30 mm, the maximum width of the base is 39 mm. Total lenght of the connection wire is about 30 cm. 

Installation is easy - the bulb is installed in place of the halogen bulb and the wires are connected. When installing, it is a good idea to take into account the space required by the fan in the base.

Not for road use, as the bulb marked in the headlight assy must be used.

H1 LED bulbs G20

With this LED conversion kit, you can replace the H1 halogen bulb with a powerful LED bulb. LED bulbs light up immediately at full power, even in the cold, so they do not experience a delay due to the heating of the bulbs like xenon bulbs. Because G20 bulbs have power, they also need cooling - cooling is provided by a fan. One bulb has two large LEDs.

The narrowness of the base and its conical shape facilitate installation. The bulbs do not have any separate ballast, but all electronics are built into the bulb, including the CANBUS controller. The LEDs illuminate evenly in two directions, giving them a natural pattern like a halogen bulb - no shading areas.

Technical data provided by the manufacturer:

- Power 24W / bulb

- Light output 2400 Lumen / bulb

- color temperature 6000K

- CANBUS compatible

- one year warranty!

The total length of the LED bulb is 90 mm, the length of the base is 45 mm, the maximum width of the base is 40 mm. The total length of the connecting cable is approx. 15 cm.

Installation is easy - the LED bulb is installed in place of the halogen bulb and the wires are connected. When installing, it is a good idea to take into account the space required by the fan in the base.

Installation may require separate adapters to install the LED bulb in place of the halogen bulb. they can be found here:

Accessories for LED conversion kits

Not for road use, as the bulb marked on the headlight assy must be used.

H4 LED bulbs L5

With this LED conversion kit you can replace the H4 halogen bulb with a powerful LED bulb. LED bulbs light up immediately at full power, even in the cold, so they do not experience a delay due to the heating of the bulbs like xenon bulbs. 

The narrowness of the base facilitate installation. The bulbs do not have any separate ballast.

Technical data provided by the manufacturer:

- Power 30W / bulb

- Light output 3000 Lumen / bulb

- color temperature 6000K

The total length of the bulb is 84 mm, the length of the base is 41 mm, the maximum width of the base is 43 x 32 mm. 

Installation is easy - the bulb is installed in place of the halogen bulb and the wires are connected. When installing, it is a good idea to take into account the space required by the base.

Not for road use, as the bulb marked in the headlight assy must be used.

HIR2 9012 LED Bulbs G7

With this LED conversion kit you can replace the HIR2 / 9012 halogen bulb with a powerful LED bulb. LED bulbs light up immediately at full power, even in the cold, so they do not experience a delay due to the heating of the bulbs like xenon bulbs. Because G7 bulbs have power, they also need cooling - cooling is provided by a fan. One bulb has four large LEDs.

The small size of the base facilitate installation. The LEDs illuminate evenly in four directions, giving them a natural pattern like a halogen bulb - no shading areas.

Technical data provided by the manufacturer:

- Power 40W / bulb

- Light output 4000 Lumen / bulb

- color temperature 6000K

- 9-36 V

- CANBUS compatible

- one year warranty!

The total length of the bulb is 70 mm, the length of the base is 25 mm, the maximum width of the base is 29 mm. 

Installation is easy - the bulb is installed in place of the halogen bulb and the wires are connected. When installing, it is a good idea to take into account the space required by the fan in the base.

Installation may require separate adapters to install the LED bulb in place of the halogen bulb. they can be found here:

Accessories for LED conversion kits

Not for road use, as the bulb marked in the headlight assy must be used.

H1 Led bulbs T1S

With this LED conversion kit you can replace the H1 halogen bulb with a powerful LED bulb. LED bulbs light up immediately at full power, even in the cold, so they do not experience a delay due to the heating of the bulbs like xenon bulbs. Because T1S bulbs have power, they also need cooling - cooling is provided by a fan.

Technical data provided by the manufacturer:

- Power 40 W / bulb

- Light output 4000 Lumen / bulb

- color temperature 6000K

- 8 - 48 V

- CANBUS compatible

- one year warranty!

The total length of the bulb is 82 mm, the length of the base is 34 mm, the maximum width of the base is 39 mm. Total lenght of the connection wire is about 30 cm. 

Installation is easy - the bulb is installed in place of the halogen bulb and the wires are connected. When installing, it is a good idea to take into account the space required by the fan in the base.

Not for road use, as the bulb marked in the headlight assy must be used.

H7 LED bulbs G7

With this LED conversion kit you can replace the H7 halogen bulb with a powerful LED bulb. LED bulbs light up immediately at full power, even in the cold, so they do not experience a delay due to the heating of the bulbs like xenon bulbs. Because G7 bulbs have power, they also need cooling - cooling is provided by a fan. One bulb has four large LEDs.

The small size of the base facilitate installation. The LEDs illuminate evenly in four directions, giving them a natural pattern like a halogen bulb - no shading areas.

Technical data provided by the manufacturer:

- Power 40W / bulb

- Light output 4000 Lumen / bulb

- color temperature 6000K

- 9-36 V

- CANBUS compatible

- one year warranty!

The total length of the bulb is 70 mm, the length of the base is 25 mm, the maximum width of the base is 29 mm. 

Installation is easy - the bulb is installed in place of the halogen bulb and the wires are connected. When installing, it is a good idea to take into account the space required by the fan in the base.

Installation may require separate adapters to install the LED bulb in place of the halogen bulb. they can be found here:

Accessories for LED conversion kits

Not for road use, as the bulb marked in the headlight assy must be used.

H8 H9 H11 LED bulbs G7

With this LED conversion kit you can replace the H8, H9 and H11 halogen bulb with a powerful LED bulb. LED bulbs light up immediately at full power, even in the cold, so they do not experience a delay due to the heating of the bulbs like xenon bulbs. Because G7 bulbs have power, they also need cooling - cooling is provided by a fan. One bulb has four large LEDs.

The small size of the base facilitate installation. The LEDs illuminate evenly in four directions, giving them a natural pattern like a halogen bulb - no shading areas.

Technical data provided by the manufacturer:

- Power 40W / bulb

- Light output 4000 Lumen / bulb

- color temperature 6000K

- 9-36 V

- CANBUS compatible

- one year warranty!

The total length of the bulb is 74 mm, the length of the base is 25 mm, the maximum width of the base is 29 mm. 

Installation is easy - the bulb is installed in place of the halogen bulb and the wires are connected. When installing, it is a good idea to take into account the space required by the fan in the base.

Installation may require separate adapters to install the LED bulb in place of the halogen bulb. they can be found here:

Accessories for LED conversion kits

Not for road use, as the bulb marked in the headlight assy must be used.

HB3 9005 LED bulbs G7

With the HB3 9005 LED conversion kit, you can replace the HB3 or 9005 halogen bulb with a powerful LED bulb. LED bulbs light up immediately at full power, even in the cold, so they do not experience a delay due to the heating of the bulbs like xenon bulbs. Because the G7 bulbs have power, they also need cooling - the fan takes care of the cooling. One bulb has four large LEDs.

The small size of the base makes installation easier - the base is not much different in size from the original halogen bulb, so these fit into even a cramped enclosure. The LEDs illuminate evenly in four directions, giving them a natural pattern, like a halogen bulb - no shaded areas. The package contains 2 LED bulbs.

Technical data provided by the manufacturer:

- Power 40W / 4000 lm / bulb

- 9 - 36 V

- 300% light output compared to a halogen bulb

- color temperature 6000K

- CANBUS compatible

- one year warranty!

The total length of the bulb is about 74 mm, the length of the base is 25 mm, the maximum width of the base is 29 mm.

Installation is easy - the bulb is installed in place of the halogen bulb and the wires are connected. When installing, it is a good idea to consider the space required by the fan in the base.

Separate adapters may be required for installation to replace the halogen bulb. they can be found here:

Accessories for LED conversion kits

Not for road use, as the bulb marked on headlight assy must be used.

9005 HB3 LED bulbs G20

With this LED conversion kit you can replace the HB3 / 9005 halogen bulb with a powerful LED bulb. LED bulbs light up immediately at full power, even in the cold, so they do not experience a delay due to the heating of the bulbs like xenon bulbs. Because G20 bulbs have power, they also need cooling - cooling is provided by a fan. One 9005 bulb has four large LEDs.

The narrowness of the base and its conical shape facilitate installation. The bulbs do not have any separate ballast - all electronics are built into the bulb, including the CANBUS controller. The LEDs illuminate evenly in four directions, giving them a natural pattern like a halogen bulb - no shading areas.

Technical data provided by the manufacturer:

- Power 40W / bulb

- Light output 4000 Lumen / bulb

- color temperature 6000K

- CANBUS compatible

The total length of the bulb is 90 mm, the length of the base is 45 mm, the maximum width of the base is 40 mm. The total length of the connecting cable is approx. 15 cm.

Installation is easy - the bulb is installed in place of the halogen bulb and the wires are connected. When installing, it is a good idea to take into account the space required by the fan in the base.

Installation may require separate adapters to install the LED bulb in place of the halogen bulb. they can be found here:

Accessories for LED conversion kits

Not for road use, as the bulb marked in the headlight assy must be used.

H7 LED BULB ADAPTERS MERCEDES

With these bulb brackets, you can attach the bulbs of the LED conversion kit to a car with bulb brackets like the one in the picture. The bulb of the LED conversion kit may not be attached to the car's original brackets, but these brackets make it possible. Used e.g. Mercedes B, C, GLA, GL and GLS models.

The brackets are sold in pairs.